2G/3G/4G/5G Cell Phone Signal Booster WA3500NR
 |
|---|
Enhanced cell phone signal coverage
Supports multiple cellular devices and users simultaneously
The uplink and downlink gain could be set independently. “+” is increasing the gain, “-” is decreasing the gain.
Automatic Gain Control
Specifications:
Frequency Range:3500MHz
Uplink:3300MHz-3800MHz
Downlink:3300MHz-3800MHz
Can be customized to add 2 more frequencies
Max. gain 70dB ±1.5dB 75dB±1.5dB
Max. output power 17dBm±1.5dB 20dBm±1.5dB
Band width Wide Band
Manual Gain Control 31dB
ALC >25dB
Ripple in band ≤ 3dB
Noise figure ≤ 5dB
VSWR ≤ 2.0
Intermodulation ≤ -40dBc
Spurious emission 9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Time delay ≤ 1.5 μs
Frequency stability ≤ 0.01ppm
MTBF > 50000 hours
Impedance 50 ohm
Power supply AC 90-264V, DC 12V/5A
AGC alarm Alarm when ALC control 5dB-10dB
Alarm mode: the display screen shows the corresponding frequency band and flashes
ISO alarm Alarm when ALC control 20dB-25dB, then repeater will auto shut down and auto restart after two minutes.
Alarm mode: the display screen shows the corresponding
frequency band and flashes
Smart LED Smart function ON/OFF
Upstream squelch function Turn off the upstream output when the input power is lower than -70dbm after 5 minutes
Mechanical specification
RF connector N-Female
Switch Manual Gain Control Switch
Cooling Heatsink Convection cooling
Humidity < 90%
Operating temperature -10°C ~ +55°C
Environment conditions IP40
Installation type Desktop
Size 195*180*55mm（without connector）
Weight < 4.0Kg